|
Post by circletrack15 on Jul 8, 2019 20:38:18 GMT
Hey guys, can anyone tell me what if any aftermarket bridges will fit on a SC-550? Can someone tell me what that measurement is from middle to middle of the bridge post's? Thanks in advance
|
|
|
Post by blindwilly3fingers on Jul 9, 2019 1:37:05 GMT
My SC550 measures approx 75mm it looks the same size posts as my Epi LP and that is also approx 75mm.
|
|
|
Post by DerAlex on Jul 15, 2019 12:23:11 GMT
Standard metric bridges (also often referred to as Asian style bidges) will work with the SC-550. Like these: www.faberguitar.com/ABRM-Fits-Metric-StudsFaber also has lightweight tailpieces made out of Aluminium. They are also quite nice. IMHO better and cheaper (bridge + tailpiece) than the Tonepros I also have.
|
|
|
Post by aboubekirov on Jun 19, 2020 12:20:52 GMT
|
|
|
Post by calebz on Jun 20, 2020 11:06:21 GMT
In your link it says they are intended for new builds only, and are not suitable for upgrade use. That leads me to believe they are using a non-standard stud spacing or some such physical/mechanical difference that precludes then from being a drop in replacement for metric or standard TOM type bridges.
|
|
167 posts
|
Post by tich65a on Jun 21, 2020 3:18:46 GMT
|
|
|
Post by Deleted on Jun 21, 2020 10:26:51 GMT
|
|
167 posts
|
Post by tich65a on Jun 21, 2020 10:58:47 GMT
these look awesome! I love them....you would not be disappointed I'm sure ..
|
|
|
Post by aboubekirov on Jun 22, 2020 14:34:26 GMT
Thank you so much for the advice. I'll think. So, dimensions are differ for 0.8 mm between holes (74.3 mm Babicz vs 73.5 mm Vanson Roller) Will think...
|
|