|
Post by dld on Feb 25, 2016 18:23:45 GMT
Bonsoir, Do you think that will be possible to put a neck TE on a LP body with the Harley Benton Kit. Excuse of my english I am french and my english si not so good. Cordialement. DLD
|
|
325 posts
|
Post by wildturkey on Feb 25, 2016 18:52:57 GMT
Like this ?? Normally They would not fit unless the les paul was routed for a tele neck If theyre both HB ask Thomann, im sure theyve a few parts around to try it.
|
|
|
Post by tarn on Feb 25, 2016 18:59:49 GMT
anything is possible.
but the TE neck is straight on its thinner heel and thinner, and a screw on.
the LP neck is slightly angled on its thicker heel, and is a glue in.
if i remember correctly TE heel is 56mm wide and LP heel is 52mm.
in its self its possible but you’ll need a hole lot of adaptation to make it work. it will probably cost more to adapt the neck then the two kits combined.
and last but not least LP type has a 628 scale, TE has 648. so you’ll need a bit of a fiddle there also.
|
|
DefJef
THBC Moderator
Due to musical differences I've decided I can't work with myself any more.
|
Post by DefJef on Feb 25, 2016 19:02:33 GMT
Like this ?? Normally They would not fit unless the les paul was routed for a tele neck If theyre both HB ask Thomann, im sure theyve a few parts around to try it. EVERYTHING about this post is cool. Congratulations.
|
|
|
Post by dld on Feb 25, 2016 19:11:16 GMT
Merci beaucoup. I thaught on the Kit HB it was the same fixation. DLD
|
|
|
Post by daveb on Feb 25, 2016 19:27:40 GMT
Like this ?? Normally They would not fit unless the les paul was routed for a tele neck If theyre both HB ask Thomann, im sure theyve a few parts around to try it. Nice. Please tell us more about that amp
|
|
|
Post by dld on Feb 25, 2016 19:32:17 GMT
Thank you I' gonna do that. bonsoir DLD
|
|
325 posts
|
Post by wildturkey on Feb 25, 2016 21:30:09 GMT
The amp is a 5 watt 1959 superlead I built. It uses the chassis & transformers from an Epi Valve junior, you could also use the Harley Ga 5 as its the same amp. With a few minor changes you can turn it into a 5 watt JCM 800. I originally had it as a combo but I built a stack for it This is how it looks at present The Guitar is made from an old mahogany bar table, I'd say its at least 50 years old. Its the same thickness as a Melody Maker 34mm , I also transformed it a few weeks ago with P-90s and a better fitting maple neck
|
|
|
Post by dld on Feb 25, 2016 21:43:57 GMT
Merci à toi. DLD
|
|
|
Post by Deleted on Feb 25, 2016 23:34:38 GMT
The amp is a 5 watt 1959 superlead I built. It uses the chassis & transformers from an Epi Valve junior, you could also use the Harley Ga 5 as its the same amp. With a few minor changes you can turn it into a 5 watt JCM 800. I originally had it as a combo but I built a stack for it This is how it looks at present The Guitar is made from an old mahogany bar table, I'd say its at least 50 years old. Its the same thickness as a Melody Maker 34mm , I also transformed it a few weeks ago with P-90s and a better fitting maple neck You are my new Idol Love that amp and that mahigani table guitar
|
|