|
Post by guesstimator on Sept 17, 2023 21:14:40 GMT
Hi, all , I was practicing when I noticed the volume level was a little lower than usual, so went to adjust it and also noticed some unusual background white noise.....then the volume suddenly got louder and the noise disappeared....only to return a couple of seconds later with a drop in volume. If I tap, push or move the amp I can get it to work properly, but occasially I get the low volume with noise issue which I need to address with a couple of well placed slaps. Valves seem seated ok and glow "normally"...touching the connector spades on the speaker does nothing, as well as moving the reverb connectors around....any ideas what might be causing the problem? Dying valves? The amp is just over a year old. Cheers
|
|
|