|
|
Post by JAC on Jun 27, 2019 12:56:01 GMT
What is that stuff and where does it come from JAC ? Is it some form of ducting grid? Drain covers? They are plastic (resin?) floor tiles for exterior patios. They clip together so it's great for storing them separately (or using just one part of the board) then clipping them together when using the full set up. I got them from Leroy Merlín (not sure if you get Leroy Merlín in the UK, it's like B&Q) and they cost about 4€ each tile. I made 2 small boards from each tile, painted them black and added velcro (which cost more than the tiles).   |
|
|
|
Post by Deleted on Jun 27, 2019 14:42:16 GMT
Hmm. Never seen these. I'll have to do a little Googloogling.
|
|
1,481 posts
Disclosures: Everything I don't like I can modify.
|
Post by blablas on Jun 17, 2020 11:02:21 GMT
Finally after almost a year - a new update.   Gone: tc electronic shimmer and chorus, rat clone, Mooer LoFi, tuner (I prefer clip-on tuners). Back: CKK tremolo, Chowny Fuzzster. New: MuTron Micro-Tron IV, Boss Multi Overtone. Moved some things around on the board not in the chain. |
|
|
|
Post by calebz on Jun 20, 2020 11:59:57 GMT
  73x16cm. Board built by me. Powered by a rockboard battery. Temple audio patch bay in the back, as well as a micro-usb port for charging the battery. |
|
173 posts
|
Post by EvolatoR on Jul 8, 2020 21:27:51 GMT
I see some nice Pedalboards here, time to share my little board with you guys. This is the board I've used to record our EP and I use for rehearsals.
Right now I am (desperately) waiting for a new pedal, the Fortin Fuzz, but Thomann says it will take another 4-5 weeks. 
Well this is how my pedal board looks like:
All pedals are on the Palmer Pedalbay 50S, powered by the Harley Benton PowerPlant ISO-1 Pro, from right to left:
- Warwick RockTuner PT2 - Ibanez Tube Screamer Mini - Mooer Noise Killer - Donner Tutti Love Chorus - NUX Timer - Donner Noise Killer (same as the Mooer, but half the price)
Sometimes I use my TC Electronic Eyemaster instead of the Tube Screamer, but since it's a full-size pedal it doesn't fit on the board anymore. I've noticed that I mostly use chorus without delay, so the Timer and Noise Killer might have to go. Which will make room for the Fortin Fuzz and a phaser or another modulation effect.
|
|
|
|
Post by calebz on Jul 9, 2020 7:54:08 GMT
Nice board EvolatoR - You've made me curious. I thought my Noise Killer was a Mooer. The controls appear to be the same as yours, but it's got a different paint job. I'll have to pull up the tape and see what brand mine is - I honestly don't even remember where I got it..lol I also just realized I didn't list any of the pedals on my board. I think this is the right order - - TC Electronics polytune mini (mooer tuner in the picture has been replaced) - NRG Customs Fuzz Fact - germanium Fuzz Factory based clone with a few circuit mods. - Nux Roctary - Fuzz, Octaver, Leslie sim. I call it the OctaFuzzLie - it's a cooler name than Roctary - Octafuzzlie speed is controlled by the Mooer expression pedal on the far left - NRG Customs germanium treble booster - Cheap phaser - can't remember the brand. starts with a K. Works ok, but not quite what I'm looking for. - Mooer Wahter mini wah. Good classic crybaby-ish sound. No tone suck, activation sensor thingie. Built like a tank. It's pretty awesome. - Noise Killer (not sure of the brand - thought it was a mooer - might be Tom's engineering or something like that) - Nux Atlantic in the effects loop. I also have the Nux Cerberus. One of the best general DI recording tools I've used - Works great live too. Makes it nice, since it has the same verb/delay section as the Atlantic. |
|
173 posts
|
Post by EvolatoR on Jul 9, 2020 14:19:29 GMT
Nice board EvolatoR - You've made me curious. I thought my Noise Killer was a Mooer. The controls appear to be the same as yours, but it's got a different paint job. I'll have to pull up the tape and see what brand mine is - I honestly don't even remember where I got it..lol Thank you calebz , your pedalboard is nice too, I like the "fuzz-section", which mine is missing atm. Your Noise Killer just looks like the one I got from Donner. The Donner Pedals are really good and just half the price of the Mooer ones. The only thing I haven't found yet is a decent "copy" of the Mooer Wahter, or maybe I can find one used.
|
|
Donut
Harley Benton Club Member
|
Post by Donut on Jul 11, 2020 18:14:10 GMT
Nice board EvolatoR - You've made me curious. I thought my Noise Killer was a Mooer. The controls appear to be the same as yours, but it's got a different paint job. I'll have to pull up the tape and see what brand mine is - I honestly don't even remember where I got it..lol I also just realized I didn't list any of the pedals on my board. I think this is the right order - - TC Electronics polytune mini (mooer tuner in the picture has been replaced) - NRG Customs Fuzz Fact - germanium Fuzz Factory based clone with a few circuit mods. - Nux Roctary - Fuzz, Octaver, Leslie sim. I call it the OctaFuzzLie - it's a cooler name than Roctary - Octafuzzlie speed is controlled by the Mooer expression pedal on the far left - NRG Customs germanium treble booster - Cheap phaser - can't remember the brand. starts with a K. Works ok, but not quite what I'm looking for. - Mooer Wahter mini wah. Good classic crybaby-ish sound. No tone suck, activation sensor thingie. Built like a tank. It's pretty awesome. - Noise Killer (not sure of the brand - thought it was a mooer - might be Tom's engineering or something like that) - Nux Atlantic in the effects loop. I also have the Nux Cerberus. One of the best general DI recording tools I've used - Works great live too. Makes it nice, since it has the same verb/delay section as the Atlantic. Your phase is a Kmise Vintage Phase, it's a rebox of the Joyo Vintage Phase which is a clone of the MXR Phase 90.
Your noise gate is a Donner Noise Killer which is a rebox of the Mooer Noise Killer which is a clone of the ISP Decimator.
|
|
|
|
Post by calebz on Jul 11, 2020 19:46:13 GMT
Thanks @donut - my board is 60 miles away, haven't had a chance to check
|
|
|
|
Post by Ted Keane on Jul 15, 2020 22:35:04 GMT
|
|
1,481 posts
Disclosures: Everything I don't like I can modify.
|
Post by blablas on Aug 6, 2020 12:23:25 GMT
Update:  Removed the HoTone delays from the board and added a EarthQuakers Devices Dispatch Master. Rearanged the order of the echo effects. |
|
|
|
Post by Deleted on Aug 6, 2020 12:39:24 GMT
Anyone know what the pedal board is that Bowie was using in 2000? It seems to have a row of buttons and two rocker pedals. I noticed him stamping on the pedals a lot at the Glasto gig and a few times during this song. Some kind of volume levels and preset vocal processing? Something to do with his own monitoring? Certainly beats signalling to the stage sound mixer to turn something up or down.
|
|
1,774 posts
|
Post by MartinB on Dec 15, 2020 17:53:56 GMT
Thinking about getting one of these or something similar Duck Board
Wilkos and Dunelm also have versions |
|
|
|
Post by blindwilly3fingers on Dec 15, 2020 18:10:47 GMT
It will do as a pedal board. Are you going to velcro or use cable ties to attach pedals MartinB? |
|
1,774 posts
|
Post by MartinB on Dec 15, 2020 18:17:40 GMT
Velcro I think, in case I want to move them around easily. Not 100% on my pedal order.
|
|
